Brief Introduction to the Structure of Complex Pendulum Jaw Crusher
The pendulum type gold ore crusher is a new crusher developed on the basis of the jaw crusher. Its structure is shown in Figure 1-4. The movable jaw with the lining is directly suspended on the eccentric shaft by rolling bearing. While the eccentric shaft is supported on the rolling bearing of the frame. The bottom of the moving jaw is supported by a thrust plate on the thrust plate seat located on the rear wall of the frame. The adjustment of the discharge port is to use the adjustment bolt to change the relative position of the wedge, so that the width of the discharge port can be adjusted. And the pendulum type jaw crusher, with a rod, spring and adjusting bolts composed of tensioning device. Driven by the motor pulley so that eccentric shaft rotation, moving jaw was driven with a complex swing, to achieve crushing material movements.
Complex pendulum jaw crushing application range
The pendulum jaw crusher has the advantages of simple structure and outstanding advantages. It can break up nearly 1000 kinds of materials such as river pebbles, quartz stone, diabase, gypsum, coal, iron ore, copper ore, coke and construction waste, It is widely used in many fields such as building materials, construction, cement, water conservancy, highway, railway, coal mine, environmental protection, metallurgy and so on.
In short, the complex pendulum jaw crusher in the crusher industry has a high market position.